您的位置: 标准下载 » 国内标准 » GB 国标 »

GB 24806-2009 行动不便人员使用的楼道升降机

时间:2024-05-17 23:06:48 来源: 标准资料网 作者:标准资料网 阅读:8896
下载地址: 点击此处下载
基本信息
标准名称:行动不便人员使用的楼道升降机
英文名称:Stairlifts for persons with impaired mobility
中标分类: 建材 >> 建筑构配件与设备 >> 电梯
ICS分类: 建筑材料和建筑物 >> 建筑物中的设施 >>
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2009-12-15
实施日期:2010-09-01
首发日期:2009-12-15
作废日期:
主管部门:全国电梯标准化技术委员会(SAC/TC 196)
提出单位:全国电梯标准化技术委员会(SAC/TC196)
归口单位:全国电梯标准化技术委员会(SAC/TC 196)
起草单位:蒂森克虏伯家用电梯(上海)有限公司
起草人:徐正浩、李天灏、鲁炯、朱昌明、薛季爱、陈凤旺、马依萍、竺荣、贾凯
出版社:中国标准出版社
出版日期:2010-09-01
页数:48页
计划单号:20070852-Q-469
适用范围

本标准规定了供行动不便人员使用的(可站立、坐着或乘坐轮椅车)、永久安装的动力驱动楼道升降机的安全准则、尺寸和功能。
本标准适用于如下的楼道升降机:
a) 在固定层站之间的楼道或倾斜面上运行;
b) 额定速度不大于0.15m/s;
c) 导轨与水平面的倾斜角不大于75°;
d) 运载装置由一条或多条导轨支撑或导向。

前言

没有内容

目录

前言Ⅰ 引言Ⅲ 1 范围1 2 规范性引用文件1 3 术语和定义2 4 基本要求6 5 导轨和机械停止装置7 6 安全钳和限速器8 7 驱动单元和驱动系统9 8 电气安装和电气设备14 9 运载装置19 10 检验和维护23 11 技术文件24 12 标识、注意事项和使用说明25 附录A (资料性附录) 选择和购买适用的楼道升降机的指南31 附录B (资料性附录) 交付使用前的检验建议32 附录C (资料性附录) 专用操作装置、开关和传感器选用建议33 附录D (资料性附录) 使用过程中的定期检验和维护34 附录E (资料性附录) 交付使用时购买者/使用人员所接受的证书35 附录F (规范性附录) 安全电路 电路设计、元件和电路故障分析36 附录G (资料性附录) 私人场所与公共场所的不同要求汇总40 参考文献41

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T1243 传动用短节距精密滚子链、套筒链、附件和链轮(GB/T1243-2006,ISO606:2004,IDT)
GB2894 安全标志及其使用导则
GB/T3766 液压系统通用技术条件(GB/T3766-2001,eqvISO4413:1998)
GB4208-2008 外壳防护等级(IP代码)(IEC60529:2001,IDT)
GB4706.1 家用和类似用途电器的安全 第1部分:通用要求[GB4706.1-2005,IEC60335-1:2004(Ed4.1),IDT]
GB/T4728.1 电气简图用图形符号 第1 部分:一般要求(GB/T4728.1-2005,IEC60617database,IDT)
GB/T5013.5 额定电压450/750V 及以下橡皮绝缘电缆 第5部分:电梯电缆(GB/T5013.5-2008,IEC60245-5:1994,IDT)
GB/T5023.6 额定电压450/750V 及以下聚氯乙烯绝缘电缆 第6部分:电梯电缆和挠性连接用电缆(GB/T5023.6-2006,IEC602276:2001,IDT)
GB5226.1 机械安全 机械电气设备 第1部分:通用技术条件(GB5226.1-2008,IEC60204-1:2005,IDT)
GB8903 电梯用钢丝绳(GB8903-2005,ISO/FDIS4344:2003,MOD)
GB14048.1-2006 低压开关设备和控制设备 第1部分:总则(IEC60947-1:2001,MOD)
GB14048.4 低压开关设备和控制设备 机电式接触器和电动机起动器(GB14048.4-2003,
IEC60947-4-1:2000,IDT)
GB14048.5 低压开关设备和控制设备 第51部分:控制电路电器和开关元件 机电式控制电路电器(GB14048.5-2008,IEC609475-1:2003,MOD)
GB/T15651 半导体器件 分立器件和集成电路 第5部分:光电子器件(GB/T15651-1995,
idtIEC747-5-1992)

所属分类: 建材 建筑构配件与设备 电梯 建筑材料和建筑物 建筑物中的设施
基本信息
标准名称:传染性造血器官坏死病毒逆转录聚合酶链式反应操作规程
英文名称:Protocol of reverse transcription polymerase chain reaction (RT-PCR) for infectious haematopoietic necrosis virus
中标分类: 农业、林业 >> 水产、渔业 >> 水产、渔业综合
ICS分类: 食品技术 >> 肉、肉制品和其他动物类食品 >> 鱼和水产品
发布日期:2004-11-17
实施日期:2005-04-01
首发日期:
作废日期:
起草单位:国家认证认可监督管理委员会
出版日期:
页数:8页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 农业 林业 水产 渔业 水产 渔业综合 食品技术 肉 肉制品和其他动物类食品 鱼和水产品
Product Code:SAE JA1004
Title:Software Supportability Program Standard
Issuing Committee:G-11 Rmsl Software Committee
Scope:In 1994 the SAE G-11 Reliability, Maintainability, Supportability, and Logistics (RMSL) Divisionchartered a software committee, G-11SW, to create several software standards and guidance documents acrossthe RMSL spectrum, including a software supportability program standard. The committee was formed as a crosssection of international representatives from commercial industries and governments.The G-11SW committee has attempted to develop a standard that is consistent with a SAE G-11 system levelsupportability program standard and augmented by necessary software-specific support information. TheG-11SW committee believes this document reflects the best current commercial practices, and meets theobjectives of the United States Department of Defense Acquisition Reform initiative. This document isperformance based and is intended to be used by industries to address market demands for supportable softwareproducts that facilitate system evolution, time to market, and implementation of cost-effective functionality. Asappropriate, governments may also reference this document.Software has been recognized by SAE G-11 as an important system component that is not adequately addressedat the system level. Software requires interpretation and variations on RMSL methods used by hardware. Thisdocument relies on the simple concept of supplier-customer dialogue and partnership to define, meet, anddemonstrate assurance of software product supportability requirements. This document describes, within a Plan-Case framework, what performance requirements are necessary. An accompanying implementation guide (SAEJA1005) sets forth current best practices for how to structure the Plan in terms of activities, tasks, and methods soas to achieve the requirements of this document and provide demonstration evidence of supportabilityachievement in the form of a Case.Development of this document and the accompanying implementation guide, as well as other supportinginformation reports, has required dedication by a few participants and extended review by a wider audience ofpotential users. The professionalism of all these individuals and the support they received from their companies,governments, and other organizations is gratefully acknowledged.Abstract驴This SAE Standard defines recommended practices for the achievement of suitable supportability andthrough-life support arrangements for software within an overall systems engineering framework. The SoftwareSupportability Plan (goals to achieve) and the Software Supportability Case (demonstration of achievement) arepresented as the basis for program management. This document is applicable to all projects incorporatingsoftware, and aims to meet the needs of end-users and of organizations that acquire, develop, or provide postdeliverysupport for software.